Channels 2.1 and 4.1 have been out here for several days. Not even an occasional pixilated flicker. Only a strange grey pattern. This is unusual in that 6.1 stay good, as do the PBS channels. Anyone else seeing this?
Barnaby
Antenna TV
Re: Antenna TV
.
This was on the TV District website this morning:
Updated December 28, 2024
NEW: Channels 2.1, 4.1, 6.1 (ABC/CBS/NBC) and 7.x (PBS) from McClure and Grizzly may pixelate or go off the air. This is due to atmospheric conditions and we can only wait for it to clear up.
NEW: The Fox channels (28.x) may be having problems for some viewers, we’re investigating. The transmitter on McClure is operating normally.
A few viewers very close to McClure are reporting loss of 2.1 and 4.1. We are investigating.
NOTE: During the fall and winter months channels 2.1, 4.1 and 6.1 (ABC/CBS/NBC) from McClure and Grizzly may pixelate or go off the air. This also occasionally happens with the 7.x channels. This is due to atmospheric conditions and we can only wait for it to clear up.
If channels are missing, please make sure your antenna looks okay and make sure the coax cable connections are very tight (beyond hand-tight). Sometimes disconnecting and reconnecting them extra tight makes a difference.
This was on the TV District website this morning:
Updated December 28, 2024
NEW: Channels 2.1, 4.1, 6.1 (ABC/CBS/NBC) and 7.x (PBS) from McClure and Grizzly may pixelate or go off the air. This is due to atmospheric conditions and we can only wait for it to clear up.
NEW: The Fox channels (28.x) may be having problems for some viewers, we’re investigating. The transmitter on McClure is operating normally.
A few viewers very close to McClure are reporting loss of 2.1 and 4.1. We are investigating.
NOTE: During the fall and winter months channels 2.1, 4.1 and 6.1 (ABC/CBS/NBC) from McClure and Grizzly may pixelate or go off the air. This also occasionally happens with the 7.x channels. This is due to atmospheric conditions and we can only wait for it to clear up.
If channels are missing, please make sure your antenna looks okay and make sure the coax cable connections are very tight (beyond hand-tight). Sometimes disconnecting and reconnecting them extra tight makes a difference.